`devf-generic`

Generic flash filesystem

You must be root to start this driver.

Syntax:

devf-generic 
    [-a] [-b priority] [-d log_method] [-E] [-e auto]
    [-f verifylevel] [-i arrayindex[,partindex]]
    [-l] [-m mountover
    [-p backgroundpercent[,superlimit]] [-R] [-r]
    [-s base[,wsize[,aoffset[,asize[,usize[,bwidth[,ileave]]]]]]]
    [-t threads] [-u update] [-V] [-v]
    [-w buffersize]

Options:

-a

Don't automount filesystem partitions present on the media. If you specify both the -a and -R options, the driver ignores the -R option.

-b priority

Enable background reclaim at the specified priority. By default, background reclamation is disabled.

-d log_method

Control the logging from the flash driver. The possible values for log_method are:

0 — log to stdout (the default).
1 — log to slogger.
2 — log to both stdout and slogger.

-E

Don't daemonize. If the driver detects a corrupt filesystem, the exit status is that filesystem's partition number plus 1.

-e auto

Only enumerate the flash partitions, instead of doing a full scan and mount. The flash driver automounts all partitions with a partition number less than or equal to auto.

For example, assume we have a flash layout as follows:

/dev/fs0p0 — raw
/dev/fs0p1 — formatted
/dev/fs0p2 — formatted
/dev/fs0p3 — formatted

If you start the driver with -e 1, the driver creates all the raw entries in /dev, but mounts only /dev/fs0p1 (/dev/fs0p0 is raw, so it's never mounted, regardless of the -e option)

-f verifylevel

Enable flash verify. (default=0, 0=none, write=1, erase=2, all=3)

-i arrayindex[,partindex]

Starting socket index and first partition index; 0 ≥ index ≥15. The default is 0,0. Use this to give multiple drivers unique IDs. The -i option is just a suggestion for the resource database manager; the selected indexes can be larger.

-l

List the available flash databases and exit.

-m mountover

Override the mountpoints assigned to the file system that are formatted with an empty (i.e. flashctl -p/dev/fs0p0 -f -n "") mountpoint. The mountover argument can include two %X format specifiers (like those for printf()) that are replaced by the socket index and the partition index.

The -m option doesn't override a mountpoint specified with mkefs.

-p backgroundpercent[,superlimit]

Set the background-reclaim percentage trigger (stale space over free space) and, optionally, the superseded extent limit before reclaim. The default is 100,16.

-R

Mount any automount filesystems as read-only. This option doesn't affect raw partition mounts, and it has an effect only at startup and initialization. Any subsequent mounting (with either flashctl or mount) ignores the -R option. If you also specify the -a option, the driver ignores the -R option.

-r

Enable fault recovery for dirty extents, dangling extents, and partial reclaims.

You should always specify the -r option unless you're trying to debug an issue concerning flash corruption.

If you don't specify -r, and a power failure occurs, the following can happen:

You can waste space. If an erasure was happening when the power was cut off, there will be some “dangling” extents (i.e. marked for deletion, but not actually deleted). If you specify the -vv option, the driver prints dangle for every dangling extent found. These extents will continue to occupy space forever, until they're deleted. Using the -r option will cause them to be reclaimed.
The system may be marked as read-only. If the driver detects an error in the structure of the filesystem, and you haven't specified the -r option, the driver marks the partition as read-only, so that it can't be further damaged.
If a reclaim operation is interrupted by a power loss, the spare block may be unusable. In this case, if you specify the -vv option, the driver prints partial to the console. The partition is still read-write, but reclaims are turned off; if you continue to overwrite files, you'll eventually fill the filesystem with stale data.

-s base[,wsize[,aoffset[,asize[,usize[,bwidth[,ileave]]]]]]

Set socket options, normally the base physical address, window size, array offset, array size, unit size, bus width, and interleave. The format is left flexible for socket services with customized drivers. This option must be specified.

The arguments are:

base: Physical base address of the flash part. This value is board-specific.
wsize: Size of the physically contiguous flash part.
aoffset: For SRAM, the offset from the base address to the start of the flash array.
asize: For SRAM, the size of the flash array. The default is equal to wsize.
usize: The size of a physical erase sector. For SRAM, this number can be any power of two. 64 KB should be the minimum, for performance reasons.
bwidth: The total width of the data bus, as seen from the microprocessor's perspective. This is the width of one flash chip multiplied by the interleave. The value must be a power of 2 (1, 2, 4, or 8).
ileave: The number of flash chips arranged on the data bus. Two 16-bit wide chips used as the upper and lower halves of a 32-bit databus give an interleave of 2. This number must be a power of 2 (1, 2, 4, or 8).

You can specify the base physical address, sizes, and offset in octal (1000), hexadecimal (0x200), or decimal (512). The sizes must be a power of two, and you can specify them with any of the following suffixes:

(nothing) — bytes
k — kilobytes
m — megabytes

-t threads

The number of threads. The minimum is 1, the default is 2, and the maximum is 100. Extra threads increase performance when background reclaiming is enabled (with the -b option) and when multiple chips and/or spare blocks are available.

-u update

Update level for timestamps; 0 for never update, 1 to update files only, and 2 to update files and directories. The default update is 0.

-V

Display filesystem and MTD version information, and then exit.

-v

Display verbose information.

-w buffersize

Write (append) buffer size in bytes. The default buffersize is 512. Using a larger write-buffer prevents the creation of very small extents, reducing overhead. If buffersize is 0, appending is disabled.

Description:

The devf-generic manager provides Flash filesystem support for any standard flash device. Typically, all you need to do is to pass the address and size using the -s option. The manager should detect the device automatically.

For information on creating a custom variant of devf-generic for your embedded system, see the Customizing the Flash Filesystem chapter of Building Embedded Systems

The default filenames are as follows (you can use the -i option to change the ID, n, appended to /dev/fs):

/dev/fsn: Default mountpoint for socket n.
/dev/fsnp0: Raw access for socket n, partition 0.
mountpoint: Flash filesystem mountpoint for socket n, partition 0 with transparent decompression.

You can specify the mountpoint above with the mount attribute of the mkefs command, and override it with the -n option to flashctl. By default, it's /fsnp0.

If you erase a raw partition or the raw array (socket), you might erase any boot monitor, BIOS, or other data installed by the manufacturer. Check the documentation for the board.

The driver probes the hardware to determine its block size. If you need to know the block size, you can:

Look in the documentation for the hardware.
Or:
Start the driver in verbose mode by specifying the -v option. In the output, U: indicates the number of units (i.e. blocks), and S: indicates the block size. Both numbers are in hexadecimal.
Or:
Start the driver, and then run flashctl, specifying the -i option.

Examples:

Start devf-generic and automatically mount the flash filesystem partitions at the base address 0xFF000 with a window size of 16 megabytes, with an initial fault recovery process, most POSIX semantics enabled and background reclaim at priority 5:

devf-generic -s 0xFF000,16M -r -u2 -b5 &

Create a 32 MB flash partition, with a 64 KB unit (sector) size:

devf-generic -s0,32m,,,64k  -v -r

Create a 128 MB flash partition, with large block sizes (to speed formatting):

devf-generic -s0,128m,,,512k -v -r

Create a 4 MB partition:

devf-generic -s0,4m,,,64k -v -r

Create a 16 MB flash partition, from a given physical address, with a 128 KB unit size, and a 16-bit wide data bus:

devf-generic -s0xa4000000,16m,,,128k,2 -v -r

Create a 16 MB flash partition, from a given physical address, with a 256 KB unit size, and a 32-bit-wide data bus, with an interleave of two:

devf-generic -s0,16m,,,256k,4,2 -v -r

Caveats:

You must specify the -s option when using this driver.

Although the Flash filesystem supports most POSIX semantics, some functionality isn't implemented in order to keep the driver simple and efficient. The unsupported POSIX semantics include:

Hard links, and everything related to hard links (the . and .. directories don't exist, struct stat's nlink member is hard-coded, and unlink() of directories returns ENOTSUP).
Access times aren't updated on the media; they're set to the modification time.

QNX Neutrino flash filesystem version 3 no longer provides built-in decompression. The flash filesystem's decompression functionality has moved into the inflator resource manager. You should now use the deflate utility to compress files.

Performance might be slow when multiple writers are writing randomly to a shared file or to a shared directory (e.g. using unlink or rename). In these cases, the offset pointers have to be rewound for every access. There's no performance penalty when appending to a file, or when creating files with open(O_CREAT), mkdir, mknod, or link.

devf-generic

`devf-generic`

Syntax:

Runs on:

Targets:

Options:

Description:

Examples:

Caveats:

See also: