Knowledge Base

BSPs and drivers

Community resources

Product documentation

Questions?

Testing hid devices

________________________________________________________________________

Applicable Environment

________________________________________________________________________

Topic: Debugging hid devices
SDP: 6.5.0
Target: Any supported target

________________________________________________________________________

Recommendation

________________________________________________________________________

Problems with usb hid devices like mouse and keyboard

1) run usb
2) run hidview if 1 and 2 works
3) run hidview -A or -a and press mouse or keyboard buttons.

Example
# hidview -a
HIDD v1.00, v1.00 DDK

Device Address : 0
Vendor : 0x413c
Product : 0x3016 (Dell Premium USB Optical Mouse)
Version : r2.00
Usage : Mouse

Report Data :
00 : 00 01 ff 00 00 00
00 : 00 01 fd 00 00 00
00 : 00 02 fd 00 00 00
00 : 00 06 f5 00 00 00
00 : 00 02 f8 00 00 00
00 : 00 01 fd 00 00 00

00 : 00 02 fc 00 00 00

________________________________________________________________________

NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns.

________________________________________________________________________

Related Attachments

None Found

Please contact us with your questions or concerns.