Knowledge Base

how to make a bootable partition on QNX4   ________________________________________________________________________ Applicable Environment ________________________________________________________________________ Topic: How to make bootable partition on QNX4 SDP: 4.25 Target: Any supported target ________________________________________________________________________ Recommendation ________________________________________________________________________ fdisk /dev/hd1 (select "boot", "loader" and "save"). mount -P /dev/hd1 dinit -h /dev/hd1t78 dinit -b -h /dev/hd1t78 mount /dev/hd1t78 /hd2 /bin/cp -pR / /hd2 ________________________________________________________________________ NOTE: This entry has been validated against the SDP version listed above. Use caution when considering this advice for any other SDP version. For supported releases, please reach out to QNX Technical Support if you have any questions/concerns. ________________________________________________________________________ Related Attachments  None Found

Please contact us with your questions or concerns.